Original
By certification 
Advantages of wood pellet machine:
A. Simple structure
B Easy to clean and maintain
C Spare parts are also easy to change, less cost for roller and dies.
D Simple operating, just 1 or 2 workers are ok
E The sort of pelletizer is easier to clean than ring die pellet machine
F Be able to change new die and rollers faster to save time to produce pellets.
G Small and light weight, which can be used in hoe, small farm, and light industrial
H Visibility to viewing the material during pelleting is the best way to fix problems.
Suitable raw material of wood pellet machine:
1)Wood pellet mill can press any biomass waste, wood waste, sawdust, straw, stalk, shell, such as peanut shell, coconut shel, baggase, grass, hay, alfalfa into pellets as fuel and feed.
2) Wood pellet mill is multifunctional, can press any grain such as corn, wheat, bean, soybean into pellets as food for animal.
3) Wood pellet mill can also press pellet from animal manure as organice fertilizer.
• 3 years warranty for whole machine(except for the mould and rollers)
• 24 hours techinical support online
• Calling or door-to-door service
Complete Pellet production line process:
(a) Peeling Process
Wood debarker machine is applicable to peel the log of MDF board and papermaking industry, it is mainly used to peel log, small wood and so on, the peeled rate is more than 95 percent.
(b)Chipping Process
In the pellet plant before raw materials are made into biomass pellets, they are
first reduced into much smaller, uniformly-sized particles. When the thicknedd is larger than 10mm or the size is greater than 50*50mm, a chippper is needed to chip these materials into smaller pieces.
(c)Grinding Process
The hammer mill is used to further crush these small pieces into particles of less than 3mm in diameter.
(d)Drying Process
After raw materials are crushed a dryer is needed since most raw wood materials have a moisture content of about 50%. However, the optimal moisture content for pelletiztion is 13%-15%. Therefore a rotary dryer is included in the pellet plant to reduce the
moisture content. After crushing and drying you can begin making wood pellets.
(e)Pelletizing Process
After crushing and drying the raw material properly it is then ready for the pellet mill. The pelletizing machine or press is the key piece of machinery in the pellet plant.
It should be mentioned that impurities in the raw materials like metal or stone,may damage the die and rollers of pellet making machine.
(f)Cooling Process
Usually after pelletizing, the temperature of pellets is between 60-80 degrees and the moisture content is close to 15%. For storage purpose, a cooler must be used to reduce their surface temperature and moisture content.
(g)Packing Process
Finally is the packing process. In order to protect the wood pellets becoming getting
damp and to increase storability, proper packing is necessary.
A. Simple structure
B Easy to clean and maintain
C Spare parts are also easy to change, less cost for roller and dies.
D Simple operating, just 1 or 2 workers are ok
E The sort of pelletizer is easier to clean than ring die pellet machine
F Be able to change new die and rollers faster to save time to produce pellets.
G Small and light weight, which can be used in hoe, small farm, and light industrial
H Visibility to viewing the material during pelleting is the best way to fix problems.
Suitable raw material of wood pellet machine:
1)Wood pellet mill can press any biomass waste, wood waste, sawdust, straw, stalk, shell, such as peanut shell, coconut shel, baggase, grass, hay, alfalfa into pellets as fuel and feed.
2) Wood pellet mill is multifunctional, can press any grain such as corn, wheat, bean, soybean into pellets as food for animal.
3) Wood pellet mill can also press pellet from animal manure as organice fertilizer.
• 3 years warranty for whole machine(except for the mould and rollers)
• 24 hours techinical support online
• Calling or door-to-door service
Complete Pellet production line process:
(a) Peeling Process
Wood debarker machine is applicable to peel the log of MDF board and papermaking industry, it is mainly used to peel log, small wood and so on, the peeled rate is more than 95 percent.
(b)Chipping Process
In the pellet plant before raw materials are made into biomass pellets, they are
first reduced into much smaller, uniformly-sized particles. When the thicknedd is larger than 10mm or the size is greater than 50*50mm, a chippper is needed to chip these materials into smaller pieces.
(c)Grinding Process
The hammer mill is used to further crush these small pieces into particles of less than 3mm in diameter.
(d)Drying Process
After raw materials are crushed a dryer is needed since most raw wood materials have a moisture content of about 50%. However, the optimal moisture content for pelletiztion is 13%-15%. Therefore a rotary dryer is included in the pellet plant to reduce the
moisture content. After crushing and drying you can begin making wood pellets.
(e)Pelletizing Process
After crushing and drying the raw material properly it is then ready for the pellet mill. The pelletizing machine or press is the key piece of machinery in the pellet plant.
It should be mentioned that impurities in the raw materials like metal or stone,may damage the die and rollers of pellet making machine.
(f)Cooling Process
Usually after pelletizing, the temperature of pellets is between 60-80 degrees and the moisture content is close to 15%. For storage purpose, a cooler must be used to reduce their surface temperature and moisture content.
(g)Packing Process
Finally is the packing process. In order to protect the wood pellets becoming getting
damp and to increase storability, proper packing is necessary.
