Price  Picture  VIP      Text List  Picture List  Photo List 
 
GDK-1 Dip Angle and Azimuth Angle CalibrationTester
Negotiable
Inquiry
 
Coating Thickness Meter  CM-8829S
  • Coating Thickness Meter CM-8829S
  • The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.) on magnetic materials (e.g. iron, nickle etc.) . often used to measure the thickness of galvanizing layer, lacq...
  • Landtek Instruments Co.,Ltd  [Verified]
Negotiable
Inquiry
 
Search Type Moisture Meter  MC-7812
Negotiable
Inquiry
 
Digital Anemometer  AM-4836C
  • Digital Anemometer AM-4836C
  • * Wide applications: use to check air conditioning & heating systems , measure air velocity, wind speed, direction, temperature, etc. * Multifunctional. the measurement unit can be selected according to different requirements. * Maximum v...
  • Landtek Instruments Co.,Ltd  [Verified]
Negotiable
Inquiry
 
Gloss Meter  GM-026
  • Gloss Meter GM-026
  • * Accurate measurement, good repetitveness. * Small in size, easy to carry. * Auto calibration. * Intelligent design, rapid measurement. * Able to store 254 groups of measurements. * Backlight display, suitable for low light envir...
  • Landtek Instruments Co.,Ltd  [Verified]
Negotiable
Inquiry
 
Lux Meter  LX-9626
  • Lux Meter LX-9626
  • Application: widely used in electro-optical sources, research teaching, metallurgy building, industry insp-ection as well as agriculture researching and illumination control. Model: LX9626 Measuring range:0-50000LUX 0-5000FC 3 RANGE: x1,x10,x100 ...
  • Guangzhou Landtek Instruments Co. Ltd  [Verified]
Negotiable
Inquiry
 
SYC61 Nonmetal Ultrasonic detector
Negotiable
Inquiry
 
SYCL-C Rapid concrete chloride tester
Negotiable
Inquiry
 
Vibration Meter  VM-6370
  • Vibration Meter VM-6370
  • * Can display the parameters of Displacement, Velocity and Acceleration simultaneously. * In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines. * Sp...
  • Landtek Instruments Co.,Ltd  [Verified]
Negotiable
Inquiry
 
Leeb Hardness Tester  HM-6560
  • Leeb Hardness Tester HM-6560
  • * Palm size for narrow space. * Test at any angle, even upside down. * Direct display of hardness scales HRB, HRC, HV, HB, HS,HL. * Large memory could store 50 groups including single measured value, impact direction, material and hardness scal...
  • Landtek Instruments Co.,Ltd  [Verified]
Negotiable
Inquiry
 
JKX-2 Full Hole Wall Imaging System
Negotiable
Inquiry
 
GDZ-1B Digital Inclinometer (High Temperature)
Negotiable
Inquiry
 
Laser Particle Size Analyzer(BT-9300H)
Negotiable
Inquiry
 
Centrifugal Sedimentation Particle Size Analyzer(BT-1500)
Negotiable
Inquiry
 
Shore Hardness Tester  HT-6510E ASK-C
  • Shore Hardness Tester HT-6510E ASK-C
  • * It meets standards of DIN 53505, ISO 868, ISO 7619, ASTMD 2240, JISK7215. * With average calculate function. * Peak value deposit function. * Under-voltage alarm function. * Use “USB data output” and “RS-232 data output” to connect ...
  • Landtek Instruments Co.,Ltd  [Verified]
Negotiable
Inquiry
 
GDL-40FW Fiber Optic Gyroscope Inclinometer (without Cable)
Negotiable
Inquiry
 
BET surface area theory, BET surface area analyser
Negotiable
Inquiry
 
SYR51+ Rebar Location System
  • SYR51+ Rebar Location System
  • Purpose SYR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete. Specification JGJ/T152-2008 Performance Longer service life of the Connector Clip: The instrument has long service life because o...
  • Beijing Samyon Instruments Co.,Ltd  [Verified]
Negotiable
Inquiry
 
Tachometer  (PHOTO/TOUCH TYPE)DT-2858
Negotiable
Inquiry
 
GDY-2D Large-bored Compass Inclinometer
Negotiable
Inquiry
 «Previous   1   2   …   3   4   …   5   6   Next»   All 104 tips / 6 page 
 

 
Top search this week
 
telephone:0551-6585685
 
newProducts